Can You Use Regular Motor Oil On A Chainsaw?

Is SAE 30 bar and chain oil the same as SAE 30 motor oil?

Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil.

If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension..

Will a chainsaw run without bar oil?

Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.

Can you use wd40 on a chainsaw?

Before you put the chain back onto your chainsaw you will have to lubricate it to clean it, using WD-40® Multi-Use Product. Before refitting the chain into the chainsaw, wipe off all the excess residue and then reattach it to the guide bar.

Can you use olive oil in a chainsaw?

Can you use olive oil in a chainsaw? Use chain saws weekly at the farm and we use motor oil as chain lube often, no problems. Olive oil would just be more expensive. Olive oil tends to get a bit gummy when used as a lubricant, but if you clean it once in a while with a decent solvent it should be fine.

Can I use 10w30 for chainsaw bar oil?

You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30.

What kind of oil do you use for chainsaws?

Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.

Can I use 5w30 for bar oil?

It will work, just wear the bar and chain faster. I don’t belive it will gum anything up.

What can I use in place of bar oil?

Canola oil is another good substitute when you don’t have access to vegetable oil. It’s able to handle high heat and protect your chainsaw bar and chain from damaging friction. That is only if you keep it well lubricated while cutting. Canola oil is also better at handling lower outdoor temperatures than vegetable oil.

Is Stihl bar oil worth?

The TSC tends to be pretty good stuff so in your case it’s totally worth it. If you want to run real winter weight and not home brew it yourself cutting down diesel you usually need to go stihl or husky; the no names don’t usually put out a winter mix.

What can you use as a substitute for bar and chain oil?

Chainsaw Bar And Chain Oil AlternativesMotor oil. If you find yourself in a situation where you need to use your chainsaw but you don’t have any of the correct oil, one of the obvious options is motor oil. … Vegetable oil. … Canola oil. … Drained hydraulic fluid.

What is a good substitute for bar oil?

Tips for replacing chain oil with vegetable oil:Use canola oil – Canola oil is currently the most common environmentally compatible chain-and-bar lubricant. … Vegetable oil is thinner – Vegetable oils have lower viscosities than the bar/chain lubricants and therefore flow more readily.More items…•

What is the difference between chainsaw bar oil and motor oil?

Some note that used motor oil could burn up your bar and chain sooner, which will make up for any cost savings. Used motor oil will sling off your chainsaw faster because it is already broken down. It lacks the sticky additive found in bar oil that keeps the oil in the bar groove and chain.

Is SAE 30 the same as 10w30?

SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. The W stands for ‘Winter’. … At operating temperature, there’ll likely be little difference between SAE 30 and SAE 10W30. In theory, they’re the same at high temperature, which is IIRC set at 100C.